Heated Cabinets

Model TH-23G

Model TH-23

CABINET CONSTRUCTION:

• 300 series stainless steel interior and exterior doors and front. Construction of liner in accordance with NSF standards.
• Anodized quality aluminum exterior ends and back.
• Barrel lock standard. Exterior mounted temperature monitor.
• Cabinet mounted on a welded, galvanized frame rail, painted for additional corrosion protection. Frame rail fitted with 4" diameter castors, front castors include brakes).
• Heater is sheathed for maximum corrosion resistance.
• Incandescent interior lighting (fluorescent interior lighting for glass door models).
• Manual humidity control.
• Equipped with 9 foot cord.

 DOORS:

• Solid door model feature 300 series stainless steel interior / exterior.
• Doors extend full width of cabinet shell. Door gaskets of one piece construction.
• Glass door model feature energy efficient "Low-E" thermal glass. Glass assembly within extruded aluminum frame, with reinforcing backing plates in each corner. Glass assembly replaceable without removing the door from hinges. The face of each door fitted with a 15" long handle of same material as door frame.]
• Adjustable torsion type closure system with aluminum block supports.

INSULATION:

• Entire cabinet structure and solid doors insulated using foamed-in-place CFC free polyurethane foam.

SHELVING:

• Adjustable, heavy duty chrome plated shelves (3). Shelves capable of supporting up to 250 lbs.
• Full height shelf support pilasters, with double oblong holes on 1/2" centers. Pilasters made of the same material as cabinet interior. Four (4) chrome plated, stainless steel shelf clips to be included for each shelf.

HEATING SYSTEM:

• 850 Watts
•  Holds 80º F to 200º F throughout the cabinet for uniform, forced-air convection heating.

ELECTRICAL CHARACTERISTICS:

• Unit completely pre-wired at factory, and ready for final connection to a 115/60/1 phase - 15 amp dedicated outlet. A cord and plug set to be included.
• 115/60/1, NEMA-5-15R plug